Ip Filter Entry - Alcatel-Lucent 7210 SAS M Configuration Manual

Common Configuration Tasks

IP Filter Entry

Within a filter policy, configure filter entries which contain criteria against which ingress, egress,
or network traffic is matched. The action specified in the entry determine how the packets are
handled, either dropped or forwarded.
•
•
•
Use the following CLI syntax to create an IP filter entry:
CLI Syntax: config>filter# ip-filter filter-id [create]
The following displays an IP filter entry configuration example.
A:ALA-7>config>filter>ip-filter# info
----------------------------------------------
----------------------------------------------
A:ALA-7>config>filter>ip-filter#
Page 106
Enter a filter entry ID. The system does not dynamically assign a value.
Assign an action, either drop or forward.
Specify matching criteria.
entry entry-id [time-range time-range-name] [create]
description description-string
description "filter-main"
scope exclusive
entry 10 create
description "no-91"
match
exit
no action
exit
exit
7210 SAS M, X Router Configuration Guide