Alcatel-Lucent 7210 SAS M Configuration Manual page 147

*A:Dut-C>config>filter#
Output Show Filter (with filter-id specified) — The following table describes the command output for
the command when a filter ID is specified.
7210 SAS M, X Router Configuration Guide
Label
Filter Id
Scope
Entries
Description
Applied
Def. Action
Filter Match
Criteria
Entry
ICMP Type
Fragment
TCP-syn
Match action
The IP filter policy ID.
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The number of entries configured in this filter ID.
The IP filter policy description.
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
Indicates the filter is an IP filter policy.
IP —
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
False —
Configures a match on all fragmented IP packets.
True —
Fragments are not a matching criteria. All fragments and non-
Off —
fragments implicitly match.
Configures a match on packets with the SYN flag set to
False —
false.
Configured a match on packets with the SYN flag set to true.
True —
The state of the TCP SYN flag is not considered as part of the
Off —
match criteria.
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is
, the filter entry is incomplete, no action was specified.
Inactive
Drop packets matching the filter entry.
Drop —
Filter Policies
Description
indicates no ICMP type
Undefined
Page 147