Alcatel-Lucent 7210 SAS M Configuration Manual page 151

Output Show Filter Associations — The following table describes the fields that display when the
associations keyword is specified.
Sample Output
A:ALA-49# show filter ip 1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id
Scope
Entries
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Service Id
Service Id
===============================================================================
A:ALA-49#
7210 SAS M, X Router Configuration Guide
Label
Filter Id
Scope
Entries
Applied
Def. Action
Service Id
SAP
(Ingress)
(Egress)
Type
: 1
: Template
: 1
: 1001
- SAP 1/1/1:1001
: 2000
- SAP 1/1/1:2000
The IP filter policy ID.
The filter policy is of type Template.
Template —
The filter policy is of type Exclusive.
Exclusive —
The number of entries configured in this filter ID.
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
The service ID on which the filter policy ID is applied.
The Service Access Point on which the filter policy ID is applied.
The filter policy ID is applied as an ingress filter policy on the inter-
face.
The filter policy ID is applied as an egress filter policy on the interface.
The type of service of the service ID.
(Ingress)
(Ingress)
Filter Policies
Description
Applied : Yes
Def. Action : Drop
Type : VPLS
Type : Epipe
Page 151