30/ASSEMBLING ENGINE
Installing the starter motor
Mounting oil filter
Filling up with engine oil
Check parts for damage and wear. Replace damaged or worn parts.
Grease the O-ring. Mount the starter engine.
Long-life grease (
Mount and tighten screws
Specification
Screw, starter motor
200064-10
Tilt the engine sideways and fill the oil filter housing to about 1/3 full with engine
oil.
Fill the oil filter
700027-11
Lubricate the o/ring of the oil filter cover.
Refit the oil filter cover
Mount and tighten screws
Specification
Screw, oil filter cover
700022-11
Thoroughly clean the plug and gear oil screen. Check parts for damage and wear.
Replace damaged or worn parts.
Clean the sealing area on the engine.
Refit the plug of engine oil screen with O-rings and tighten it.
Specification
Plug, engine oil screen
400364-10
Remove the screw cap
Engine oil
Mount and tighten screw cap
700032-11
P. 175)
.
M6
with engine oil and place it in the oil filter container.
.
.
M5
M17x1,5
on the generator cover and fill up with engine oil.
0.6 l (0.63 qt.)
Engine oil (SAE 10W/50) (
.
111
10 Nm
(7.38 lbf ft)
6 Nm (4.43 lbf ft)
20 Nm
(14.75 lbf ft)
P. 174)