Mounting Oil Filter; Filling Up With Engine Oil; Topping Up Engine Oil - KTM 450 SXS-F Owner's Manual

Hide thumbs Also See for 450 SXS-F:
Table of Contents

Advertisement

MAINTENANCE ON CHASSIS AND ENGINE
x

Mounting oil filter

Filling up with engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.

Topping up engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Check parts for damage and wear. Replace damaged or worn parts.
Lay the motorcycle on its side and fill the oil filter housing to about
engine oil.
Fill the oil filter with engine oil and place it in the oil filter container.
Oil the O-ring of the oil filter cover and assemble it with the oil filter cover
Mount and tighten screws.
Specification
Screw, oil filter cover
400264-10
Stand the motorcycle up.
x
Remove the screw cap
Engine oil
Mount and tighten screw cap
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
400265-10
Start the engine and check that it is oil-tight.
Check the engine oil level. (
Remove the screw cap
Engine oil (SAE 10W/50) (
Mount and tighten screw cap
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
400265-10
Start the engine and check that it is oil-tight.
on the clutch cover and fill up with engine oil.
1.35 l (1.43 qt.)
.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in a closed space.
P. 65)
on the clutch cover and fill up with engine oil.
P. 82)
.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in a closed space.
full with
M6
10 Nm (7.4 lbf ft)
Engine oil (SAE 10W/50) (
67
.
P. 82)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents