Items In The Extended Menu - Sony XDS-1000 Operation Manual

To save the current settings in a menu bank
1
Select a menu item from B11 "SAVE SETUP BANK-
1" to B13 "SAVE SETUP BANK-3" using the PUSH
SET knob.
2
Press either the PUSH SET knob or the SELECT
function (F2) button.
3
Change the setting to "on" using either the PUSH SET
knob or + function (F4) button.
4
Press the SAVE function (F5) button.
"NOW SAVING..." is displayed, and the current
settings are saved in the selected menu bank.
Note
Settings are not saved in the current bank when saving to a
menu bank. To save changed settings in both a menu bank
and the current bank, press the SAVE function (F5) button
again after saving the settings in a menu bank to save the
settings in the current bank.

Items in the extended menu

The following tables show the items in the extended menu.
• The values in the "Settings" column are the values that
appear in settings screens. The values in brackets [ ] are
Item number Item name
101 SELECTION FOR SEARCH DIAL
ENABLE
105 REFERENCE SYSTEM ALARM
108 AUTO EE SELECT
114 AUDIO MONITOR OUTPUT LEVEL
121 FRAME PB MODE
Menu items in the 100s, relating to the control panels
Settings
Select how the unit enters the shuttle, jog, or variable-speed mode.
dial direct [dial]: Press the SHTL/JOG or VAR/JOG button or, except
during recording/editing, turn the jog dial or shuttle dial.
via search key [key]: Press the SHTL/JOG or VAR/JOG button.
Select whether to cause the STOP button to flash as an alarm whenever
the reference video signal is not input or whenever it does not match the
system frequency.
off: STOP button flashing alarm is disabled.
on: STOP button flashing alarm is enabled.
a)
If PB/EE is set to "EE" on the P5 OTHER page in the function menu, this
selects the operation modes in which video/audio signal are handled as
E-E signals.
stop/f.fwd/f.rev [S/F/R]: In stop, forward direction high-speed search,
and reverse direction high-speed search modes.
stop: In stop mode.
Select whether to control the level of the audio signal output from the
AUDIO MONITOR OUTPUT R, L connectors with the LEVEL adjustment
knob for the PHONES jack.
variable [var]: Control.
fixed: Do not control.
Select the variable-speed playback field/frame mode.
auto: Field playback
frame: Frame playback.
Compared to field playback, frame playback gives more detail during
playback of still pictures.
To recall settings saved in a menu bank
1
Select a menu item from B01 "RECALL SETUP
BANK-1" to B03 "RECALL SETUP BANK-3" using
the PUSH SET knob.
2
Press either the PUSH SET knob or the SELECT
function (F2) button.
3
Change the setting to "on" using either the PUSH SET
knob or + function (F4) button.
4
Press the LOAD function (F5) button.
"NOW LOADING..." is displayed, and the settings
saved in the selected menu bank are loaded into the
current settings.
5
Press the SAVE function (F5) button.
"NOW SAVING..." is displayed, and the current
settings are saved in the current bank. When saving is
finished, the display returns to the operating screen.
the value shown in menu screens (when they differ from
the values shown in settings screens).
• The underlined values are the factory defaults.
97
Setup Menu