Sony XDS-1000 Operation Manual page 103

Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name
666 METADATA ITEM OUT
668 USER META DATA OUTPUT IN
MXF
a) Not displayed when the unit is in 23.98P mode.
b) When the optional XDBK-105 is installed and maintenance menu item M397 PORT CONFIGURATION is set to "VTR mode".
Item number Item name
703 BLANK LINE SELECT
Sub-item
ALL LINE
In 59.94i/59.94P/
29.97P mode
(UC)
In 59.94i/59.94P/
29.97P mode (J)
In 50i/50P/25P
mode
705 EDGE SUBCARRIER REDUCER
a)
MODE
707 FORCED VERTICAL
INTERPOLATION OFF
Settings
Specify whether to include the information from recorded VANC packets
in data items in the DATA ITEM section of MXF files.
off: Do not include VANC packet information in DATA ITEM.
on: Include VANC packet information in DATA ITEM.
Select whether to output user metadata to MXF files.
off: Do not output.
on: Output.
Menu items in the 700s, relating to video control
Settings
a)
Switch blanking of the video output signal on or off for individual lines in
the vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
- - -: Specify the blanking for each line separately.
blank [blnk]: Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
throu [thru]: Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
LINE 12 ... Specify blanking for lines 12 to 19.
LINE 19 blank [blnk]: Carry out blanking.
throu [thru]: Switch off blanking.
LINE 20 Specify blanking for line 20.
blank [blnk]: Carry out blanking.
half: Carry out half-blanking.
throu [thru]: Switch off blanking.
LINE 12 ... Specify blanking for lines 12 to 20.
LINE 20 blank [blnk]: Carry out blanking.
throu [thru]: Switch off blanking.
LINE 21 Specify blanking for line 21.
blank [blnk]: Carry out blanking.
half: Carry out half-blanking.
throu [thru]: Switch off blanking.
LINE 9 ... Specify blanking for lines 9 to 22.
LINE 22 blank [blnk]: Carry out blanking.
throu [thru]: Switch off blanking.
LINE 23 Specify blanking for line 23.
half: Carry out half-blanking.
throu [thru]: Switch off blanking.
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable ESR.
off: Do not enable ESR.
The "Y-add" function is normally switched on automatically during jog or
variable-speed playback. This item selects whether to force the "Y-add"
function off.
auto: Automatically switch the "Y-add" function on.
forced YADD off [off]: Force the "Y-add" function off.
The "Y-add" function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
103
Setup Menu