Items In The Extended Menu - Sony XDS-PD1000 Operation Manual

Items in the extended menu

The following tables show the items in the extended menu.
• The values in the "Settings" column are the values that
appear in settings screens. The values in brackets [ ] are
Item number Item name
101 SELECTION FOR SEARCH DIAL
ENABLE
114 AUDIO MONITOR OUTPUT LEVEL
121 FRAME PB MODE
130 DISPLAY DIMMER CONTROL
131 AUDIO VOLUME
155 STREAM CHASE
Item number Item name
208 PROTOCOL FOR REMOTE(9P)
Sub-item
1 #2 (PB)
Menu items in the 100s, relating to the control panels
Settings
Select how the unit enters the shuttle, jog, or variable-speed mode.
dial direct [dial]: Press the SHTL/JOG or VAR/JOG button or, except
via search key [key]: Press the SHTL/JOG or VAR/JOG button.
Select whether to control the level of the audio signal output from the
AUDIO MONITOR OUTPUT R, L connectors with the LEVEL adjustment
knob for the PHONES jack.
variable [var]: Control.
fixed: Do not control.
Select the variable-speed playback field/frame mode.
auto: Field playback
frame: Frame playback.
Compared to field playback, frame playback gives more detail during
playback of still pictures.
Set the brightness of the indication on the LCD.
10%, 25%, 50%, 75%, 100%
Select whether each of the CH-1/ALL CH, CH-2 to CH-4 adjustment
knobs on the control panel is effective to control the audio recording level
and playback level on each channel or the CH-1/ALL CH adjustment
knob alone functions as a master control to control the audio level on all
channels together.
each: Each of the CH-1/ALL CH, CH-2 to CH-4 adjustment knobs is
all: The CH-1/ALL CH adjustment knob alone functions as a master
Specify whether perform chase output with CIFS during recording.
disable (disc style) [disc]: Do not perform chase output with CIFS
enable (growing style) [ena]: Perform chase output with CIFS (perform
This unit supports MXF V1.3 format.
MXF V1.3 format supports chase output by enabling data in the header
metadata area storing information on clip length, etc. to the footer
partition at the end of the MXF file as well as to the header partition. This
enables clips being recorded to be output via CIFS and handled on the
network.
Note
When using a nonlinear editor that is not a Sony product, please contact
the maker to confirm whether it is possible or not to receive clips output
by the chase output function using MXF V1.3 format.
Menu items in the 200s, relating to the remote control interface
Settings
Select the protocol used with a REMOTE (9P) connector, for each port.
Select the protocol used with the playback port.
VTR: Sony 9-pin VTR protocol
VDCP: VDCP protocol
the value shown in menu screens (when they differ from
the values shown in settings screens).
• The underlined values are the factory defaults.
during recording/editing, turn the jog dial or shuttle dial.
effective to control each channel.
control.
When "all" is selected, the ALL CH indicator under the CH-1/ALL CH
adjustment knob lights up.
(perform output in an MXF format compatible with existing devices).
output in the MXF format unique for chase output).
79
Setup Menu