Sony XDS-1000 Operation Manual page 124

When a memory card is inserted
Alarm message in status
display area
Unknown Media(A/B)
Memory (A/B) needs
Restoring.
Unknown FS!(A/B)
R/W Limit(A/B)
Over DUR!(A/B)
Under Repair of Media
(A/B)
Repair Failed (A/B)
During front panel operations
Alarm message in status
display area
KEY INHI.!
Not Open Clip!
Clip Top!
Clip End!
EDL Top!
EDL End!
MAX # Clips
Media Full!
124
Troubleshooting
Alarm message in video monitor screen Description/action
UNKNOWN MEDIA(A/B).
PLEASE CHANGE.
MEDIA ERROR.
MEDIA(A/B) NEEDS TO BE RESTORED.
CANNOT USE MEDIA(A/B).
UNSUPPORTED FILE SYSTEM.
MEDIA REACHED REWRITE LIMIT.
CHANGE MEDIA(A/B).
EXCESSIVE DURATION IS IN
MEDIA(A/B) .
MEDIA (A/B) IS BEING REPAIRED.
REPAIR FAILED.
Description/action
This appears when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
This appears when a clip operation is attempted with no clip selected.
Select a clip in the clip list screen and try the operation again.
During playback, this appears if you execute a reverse search when the unit is stopped at the first
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During playback, this appears if you execute a forward search when the unit is stopped at the last
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During EDL playback, this appears if you press the PREV button at the first frame of the first sub
clip of an EDL.
During EDL playback, this appears if you press the NEXT button at the last frame of the last sub
clip of an EDL.
No more clips can be recorded because the maximum number of recorded clips has been
reached.
Delete unneeded clips.
Recording or copying is not possible because the internal storage is full.
Delete unneeded clips.
The inserted memory card has been partitioned, or it
contains more clips that the maximum that can be
handled by this unit.
Insert a memory card that has not been partitioned,
or one that contains fewer than the maximum number
of clips.
A memory card must be restored because an error
has occurred in the card.
Restore the card or format it.
The inserted memory card is formatted with an
unsupported file system, or it is not formatted.
Format the memory card, or exchange the memory
card for one that is formatted with a file system
supported by this unit.
The memory card has reached its lifetime rewriting
limit.
As required, copy the clips on the memory card to
internal storage, and then exchange the memory
card.
Note
If you continue to use the memory card, normal
recording and playback may not be possible.
A clip with a duration that exceeds 12 hours is
recorded on a memory card.
This memory card cannot be used.
Automatic repair for the management area of the
memory card is in progress.
Wait until the automatic repair is complete.
The memory card is damaged, and recording and
playback are not possible.
Replace the memory card.