Sony XDS-1000 Operation Manual page 62

When two SxS memory cards are inserted
Press the MEMORY button, and select the copy
source card (A/B).
8
Press the START function button (F5).
Copying of the clips starts.
The progress of the copying is shown in the Clip Copy
screen, and the copy icon lights in the status display
area.
To perform an internal storage operation during
copy execution
Press the INTERNAL button to switch to the internal
storage screen.
When the internal storage screen is displayed, the
display of the progress of copy processing is hidden.
To show the progress of copy processing, press the
COPY button. To hide the display of copy processing
progress, press the DISP OFF function button (F6).
To abort the copy operation
Press the ABORT function button (F1), and then press
the YES (F5) button.
The data having already been transferred to the
destination media remains on that media.
If the copy operation is completed successfully, the
message "Copy was successful." appears.
9
Press the OK function button (F5).
The Clip Copy screen disappears, and you return to the
original screen.
Copying clips to an SxS memory card
To copy clips on the internal storage to an SxS
memory card
Insert an SxS memory card into the card slot, and carry out
the procedure described in "Copying clips to the internal
storage" (see page 61).
However, press the INTERNAL button in step 2 and select
"SELECTED" in step 6. (When the copy source media is
the internal storage, you cannot select "ALL".) Select the
SxS memory card as the copy destination media in step 7.
62
Copying
To copy clips from an SxS memory card to
another SxS memory card
Insert the copy source and copy destination SxS memory
cards, then carry out the procedure in "Copying clips to the
internal storage" (page 61). In step 2, press the
MEMORY button. In step 7, select SxS memory card as
the copy destination media.
To resume the aborted copying
When copying to an SxS memory card, if during copying
the remaining space on the memory card becomes
insufficient, a message is displayed to confirm whether or
not to abort copying. If you then insert a recordable
memory card, you can continue copying from the point
where copying was stopped.
If continuing simultaneous recording spanning multiple
memory cards, you can set the overlap between memory
cards in menu item 160 INTER-MEDIA OVERLAP
SELECT.
To copy an EDL file
An EDL can be copied by an operation similar to a clip
copy operation. However, it is necessary to make a copy of
all clips referenced by the EDL in advance. Therefore,
"ALL" is automatically selected in step 6 of the procedure
for "Copying clips to the internal storage" (page 61).
To copy the specified part of a clip
When you set an IN and OUT point in the clip, it becomes
possible to copy only the part defined by the IN and OUT
points.
1
In the video monitor screen, cue the clip up to the
frame where you want set an IN point.
2
Press the PUSH SET knob while holding down the <
button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The IN point timecode is displayed in the IN/OUT
setting window, and the IN indicator lights.