Inserting/Removing An Sxs Memory Card; Switching Between Sxs Memory Cards - Sony XDS-1000 Operation Manual

Professional media station
Hide thumbs Also See for XDS-1000:
Table of Contents

Advertisement

Inserting/removing an SxS memory
card
MEMORY ACCESS A/B lamps
MEMORY button
To insert an SxS memory card
Insert the SxS memory card into the card slot.
Insert with
the label
side facing
upward
The MEMORY ACCESS A/B lamp lights in red then
changes to green once the memory card is ready for use.
Status indications by the MEMORY ACCESS A/B
lamps
Card slots A and B are accompanied by the respective
lamps to indicate their statuses.
Lamp
Slot statuses
Lights in orange
Accessing the loaded SxS memory card
(writing/reading data)
Lights in green
Standby (ready for recording or playback
using the loaded SxS memory card)
Off
• No SxS memory card is loaded.
• The loaded card is invalid.
• An SxS memory card with an option
key file stored is loaded.
To remove an SxS memory card
1
Press the eject button to release the lock, then pull the
button out.
Memory card slots
Eject buttons
Press the button
once to release
the lock
2
Press the eject button again to remove the card.
Note
Data are not guaranteed if the power is turned off or a
memory card is removed while the card is being accessed.
All data on the card may be destroyed. Be sure that the
MEMORY ACCESS A/B lamps are lit in green or off
when you turn off the power or remove memory cards.
Switching between SxS memory
cards
When SxS memory cards are loaded in both memory card
slots A and B, press the MEMORY button to select the
card you wish to use.
Note
The MEMORY button is disabled while copying is in
progress, that is, switching is not executed even if you
press the button.
49
Handling Memory Cards

Advertisement

Table of Contents
loading

Table of Contents