Sony XDS-1000 Operation Manual page 99

Item number Item name
158 PLAYBACK MODE FOR INTERNAL Set whether to play multiple clips when playing clips in internal storage.
159 PROXY GENERATOR
160 INTER-MEDIA OVERLAP SELECT
a) When maintenance menu item M 397 PORT CONFIGURATION is set to "VTR mode".
Item number Item name
208 PROTOCOL FOR REMOTE(9P)
Sub-item
1 #2 (PB)
2 #1 (REC)
212 VIDEO REMOTE CONTROL
a)
SELECT
a) Not displayed when the unit is in 23.98P mode.
Menu items in the 100s, relating to the control panels
Settings
clip: Plays single clips (clip mode).
continuous [cont]: Plays multiple clips consecutively (continuous
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
"VTR mode", the playback mode is set to "continuous" and this item is not
displayed.
Set whether to generate proxy audio/video data when copying clips
without proxy AV data or partial clips to internal storage or UDF-format
SxS memory cards, or when uploading (PUT) from a computer using an
FTP connection.
disable [dis]: Do not generate proxy audio/video data.
enable [ena]: Generate proxy audio/video data.
Set the overlap duration between media when simultaneously recording
or copying to multiple memory cards.
off: No overlap.
30 sec [30 s]: 30 seconds overlap.
1 min [1 m]: 1 minute overlap.
Menu items in the 200s, relating to the remote control interface
Settings
Select the protocol used with a REMOTE (9P) connector, for each port.
Select the protocol used with the playback port.
VTR: Sony 9-pin VTR protocol
VDCP: VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
"VTR mode", the protocol is set to "VTR" and this sub item is not
displayed.
Select the protocol used with the recording port.
VTR: Sony 9-pin VTR protocol
VDCP: VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
"VTR mode", the protocol is set to "VTR" and this sub item is not
displayed.
Select the method used to control the internal digital video processor
and to make related settings.
menu: Use the setup menu to change settings.
remote (down converter) [dc]: Control the down-converter from an
remote (up converter) [uc]: Control the up-converter from an HKDV-
playback mode).
HKDV-900 or another device connected to the VIDEO CONTROL
connector.
900 or another device connected to the VIDEO CONTROL
connector.
99
Setup Menu