Sony XDS-1000 Operation Manual page 56

Playback in clip mode
The available playback types include normal playback,
high-speed playback in the forward or reverse directions,
and jog, shuttle, and variable-speed playback. Playback
stops when it reaches the start or end of the clip/EDL. The
next and preceding clips are not played, even if they exist
on the media.
To move to another clip, press the PREV, NEXT, SHIFT
+ PREV, or SHIFT + NEXT button, or perform a
thumbnail search.
About the playback start position
Immediately after this unit starts
The playback start position varies depending on the clip
playback mode.
Continuous playback mode: Playback starts from the last
playback position when power was disconnected.
Clip mode: Clips remain closed. Start playback by
selecting a clip/EDL from a clip list display screen.
After SxS memory card insertion
The unit stops at the position of the memory card when it
was most recently ejected.
Press the PLAY button to resume playback at the most
recent position.
The playback position is saved to the memory card when
the memory card is ejected, which allows playback to start
at that position whenever it is loaded into any XDCAM
player.
Notes
• This function is not available when the Write Inhibit tab
of the memory card is set to the recording disabled
position.
When the Write Inhibit tab is in the recording enabled
position and the format of recorded sections on the
memory card is not the same as the recording format
setting of this unit, the REC INHI indicator lights, but in
this case the playback position is saved to the memory
card.
• When playback is stopped on an EDL, the playback
position is not saved.
• The playback position is not saved for FAT/exFAT-
format memory cards.
After recording stops
The unit stops at the position where recording ended.
To play back a clip, press the PREV button to move to the
start frame of any clip or press the PREV button with the
PLAY button held down to move to any position.
After playback stops
When you press the STOP button, playback stops at that
position and the position is saved.
When you press the PLAY button, playback starts from the
stopped position.
56
Playback
Note
When playback is stopped on an EDL, the playback
position is not saved.
1080/720 cross convert function
You can output 720 while playing clips recorded as 1080,
and output 1080 while playing clips recorded as 720.
When the system frequency of clips (59.94i/59.94P/
29.97P, or 50i/50P/25P) matches the system frequency of
the unit, but the number of system line settings (1080 or
720) do not match, then clip playback is cross converted
automatically.
In cross convert mode, "FC" is displayed .
SD up convert function
You can output HD while playing clips recorded as SD.
HD down convert function
You can always output SD while playing clips recorded as
HD.
Pulldown playback
When this unit's system frequency is set to 1080/59.94i,
1080/29.97P, or 720/59.94P, clips recorded as 1080/
23.98P are converted by 2-3 pulldown before playback
(pulldown playback).
Timecode in pulldown playback
During pulldown playback, timecode is also converted to
30-frame timecode to match the output video signals.
The upper row of the time data display area displays the
original 24-frame timecode, and the lower row displays the
30-frame timecode.
TC VITC
00:59:59:23
PDT 00:59:59:29
You can superimpose the 30-frame timecode after
pulldown on an external monitor. To do so, set setup menu
item 005 DISPLAY INFORMATION SELECT to "time
data only".
TCR 00:59:59:23
PDT 00:59:59:29
Repeat playback function
When setup menu item 142 REPEAT MODE is set to
"play", you can start repeated playback of a clip/EDL on
the internal storage.
In repeat playback mode,
view screen.
is displayed on the details