Sony XDS-1000 Operation Manual page 95

To display a setup menu, press the MENU button.
The currently selected menu item is displayed in reverse
video.
Currently selected item
Group name for the currently selected item
Buttons used to change settings
Use the following buttons to change setup menu settings.
Menu control Functions
buttons
MENU button Displays and hides the setup and user
interface menus.
PUSH SET knob • When turned clockwise or
counterclockwise, moves the reverse
video to select the item to change.
• When turned clockwise or
counterclockwise, changes a menu
item setting.
• When pressed, answers "Yes" to a
question.
Function buttons RETURN: Goes up one level.
F1 to F6 SELECT: Selects an item.
(The function to UP: Skips back 100 or 50 items in the
be displayed list of menu items.
varies depending DOWN: Skips forward 100 or 50 items in
on the situations.) the list of menu items.
SAVE: Saves a new setting to memory.
EXIT: Exits the current menu.
–: Changes a setting.
+: Changes a setting.
RESET button • Returns the current setting to the
factory default.
• Answers "No" to a question.
To change the settings of menu items
Proceed as follows to change the settings of menu items.
1
Use the PUSH SET knob to select the required item.
Example: Screen display when item 005 DISPLAY
SEL is selected
2
Press the PUSH SET knob or the SELECT function
button (F2).
This displays the setting screen for the menu item
selected in step 1.
Example: Setting screen display when item 005
DISPLAY INFORMATION SELECT is selected
Current setting
3
Use the PUSH SET knob or the +/– function button
(F3 or F4) to change the setting.
Turning the PUSH SET knob while holding down the
SHIFT button increases the increment of adjustment.
4
To change other settings, press the PUSH SET knob or
the RETURN function button (F1) to return to the
previous screen, then repeat steps 1 to 3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor screen, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor screen returns to its normal indications.
Notes
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message "ABORT !" appears on the video
monitor screen for about 0.5 seconds, and the system
exits the menus. To change more than one setting, be
Current setting
95
Setup Menu