Sony XDS-1000 Operation Manual page 109

Item number Item name
926 11 PID(VIDEO)
12 PID(AUDIO)
13 PID(AUX1)
14 PID(AUX2)
930 DOWN CONVERTER MODE
931 DOWN CONVERTER LETTER BOX
a)
MODE
932 H CROP POSITION (DC)
934 CROSS COLOR (DC)
935 DETAIL GAIN (DC)
936 LIMITER (DC)
a)
937 CRISP (DC)
Menu items in the 900s, relating to digital process
Settings
Changes the VIDEO packet PID value for DVB-ASI output.
30 to 810 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
20 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the AUDIO packet PID value for DVB-ASI output.
30 to 814 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
20 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the AUX1 packet PID value for DVB-ASI output.
30 to 815 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
20 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the AUX2 packet PID value for DVB-ASI output.
30 to 811 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
20 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
a)
Select the down-converter mode.
EDGE CROP [CROP]: Select the edge crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
Select the aspect ratio of the down-converter output when menu item
930 is set to "LETTER BOX".
16:9: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down-converter output when menu item 930 is set to
"EDGE CROP".
–120 to 0 to 120
a)
Adjust the down-converter cross color.
0 to 8 to 15
a)
Adjust the down-converter image enhancer. Adjust the sharpness of
edge enhancement.
0 to 7FH
a)
Adjust the down-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
Adjust the down-converter image enhancer. Set the threshold amplitude
for emphasis (signals of amplitude lower than the threshold are not
emphasized).
0 to FH
109
Setup Menu