Playback Operations Using Thumbnails; Chase Play - Sony XDS-1000 Operation Manual

Professional media station
Hide thumbs Also See for XDS-1000:
Table of Contents

Advertisement

Playback in variable-speed mode starts.
4
To stop playback in variable-speed mode, return the
shuttle/jog dial to the center position, or press the
STOP button.
To alternate between normal-speed playback and
variable-speed mode playback
Set the shuttle/jog dial to the position corresponding to the
desired variable-speed playback speed, then switch
between normal-speed playback and variable-speed mode
playback by pressing the PLAY and VAR/JOG buttons
alternately.
To set shot marks on the frame being
played back when playback operation is
performed with the playback port selected
When you press the PUSH SET knob while holding down
the up or down arrow button when playback operation is
performed with the playback port selected.
A shot mark 1 or 2 is set as an essence mark, respectively
on the frame being played back.
You can set shot marks even when playing from SxS
memory cards.
The shot marks can also be set during recording. For
details, see page 51.
Playback operations using
thumbnails
Playback operations that you can perform with thumbnails
include searching for clips, displaying clip information,
and locking and deleting clip. This allows you to check the
actual video as you work.
See "Clip Operations" (page 71) for more information
about thumbnail operations.

Chase play

While recording to internal storage (hard disk drives), you
can start playing the recorded part of the clip from the start,
without waiting for the recording to finish (chase play).
To perform chase play, perform steps 1 to 3 of "Selecting
a clip or an EDL" (page 57), and then proceed as follows.
1
Do one of the following to select a clip that show the
recording icon z.
• Turn the PUSH SET knob.
• Press the arrow buttons.
2
Press the PLAY button.
To jump to the last frame that is playable at that
time
Press the NEXT button.
Note
For MPEG recording, the minimum time difference
between chase play and source during recording is about
seven seconds. You can fast forward chase play during
recording, but you cannot come closer than seven seconds
to the source.
59
Playback

Advertisement

Table of Contents
loading

Table of Contents