Sony XDS-1000 Operation Manual page 110

Item number Item name
938 LEVEL DEPEND THRESHOLD
a)
(DC)
939 H DETAIL FREQUENCY (DC)
940 H/V RATIO (DC)
942 V FILTER SELECT (DC)
943 CROSS COLOR CRISP (DC)
944 D/C LEGALIZE (DC)
950 UP CONVERTER MODE
951 H CROP POSITION (UC)
952 LETTER BOX POSITION (UC)
953 UP CONVERTER PROCESS
954 DETAIL GAIN (UC)
955 LIMITER (UC)
956 CRISP THRESHOLD (UC)
957 LEVEL DEPEND THRESHOLD
a)
(UC)
958 H DETAIL FREQUENCY (UC)
959 H/V RATIO (UC)
110
Setup Menu
Menu items in the 900s, relating to digital process
Settings
Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
a)
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz
a)
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
a) c)
Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
If the setting value is large, the vertical resolution is high.
1 to 3
a)
Set the cross color crisp level for down-converter output.
0 to 4 to FH
For down converter output, selects whether to suppress signals with
levels that are lower than the pedestal level.
off: Do not suppress signals lower than the pedestal level.
on: Suppress signals lower than the pedestal level.
a)
Select the up-converter mode.
EDGE CROP [CROP]: Select the edge crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up-converter output when menu item 950 is set to "EDGE
CROP".
–120 to 0 to 120
a)
When menu item 950 is set to "LETTER BOX", adjust the vertical location
of the position where the picture is cut out for up-converter output in letter
box mode.
–120 to 0 to 120
a)
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.
a)
Adjust the up-converter image enhancer. Adjust the sharpness of edge
enhancement.
00 (HEX) to 40 (HEX) to 7F (HEX)
a)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX) to 3F (HEX)
a)
Adjust the up-converter image enhancer. Set the threshold amplitude for
emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX) to 08 (HEX) to 0F (HEX)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX) to 0F (HEX)
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX) to 07 (HEX)