Sony XDS-1000 Operation Manual page 126

During playback operations
Alarm message in status
display area
ILL. PLAY!
MEM. Empty!
Media Data Error!
This Clip cannot be Played
back.
No MEMORY-(A/B)!
MEMORY Busy!
Operation is not
Supported for EDL.
MEMORY Busy!
NETWORK
During operations in the clip list screen/thumbnail search/EDL editing/copying
Alarm message in clip
list screen
Clip is Locked.
Copy Running!
Operation Failed!
Not Supported Format.
Copy Aborted.
Some Clip(s) are Locked.
Clip Error.
Set Appropriate IN/OUT
Points.
No Clip!
Cannot Expand Clip any
Further.
Clip is not Ready.
Delete is Prohibited.
This Clip is in Use.
Delete is Prohibited.
Referring EDL is in Use.
Delete is Prohibited.
Lock/Unlock is Prohibited.
This Clip is in Use.
Lock/Unlock is Prohibited.
Set Clip Flag was not
Performed.
126
Troubleshooting
Alarm message in video monitor screen Description/action
ILLEGAL PLAYBACK.
MEMORY EMPTY !!
MEDIA DATA ERROR DETECTED.
–
–
–
–
–
Description/action
The clip is locked.
This appears when an attempt is made to delete a clip, or set or clear a clip flag when the clip is
locked.
A copy operation is being performed, so another copy operation is not allowed.
The target operation failed because of generation of an internal error.
The format is not supported by this unit, so copy operation is impossible.
The copy operation was aborted.
Some of the selected clips are locked (protected).
The clip is substandard, so the copy operation failed.
The settings of IN and OUT points for partial copy operation are not proper.
Check the IN and OUT point settings.
The clip selected for expansion or chapter display has been deleted. Alternatively, the memory
card has been ejected.
The selected clip cannot be divided any further to display the expand thumbnails.
This alarm appears when the expand thumbnails of a clip divided into the maximum number of
blocks are displayed or when the EXPAND function button has been pressed with the expand
thumbnail screen displayed in which the duration of each block is one frame.
Chase copy cannot be performed because recording has just started.
Wait until the chase copy function is enabled.
The target clip is being used, so it cannot be deleted.
The EDL which refers to the target clip is being used, so the clip cannot be deleted.
Deletion of the target clip has failed.
The target clip is being used, so it cannot be locked/unlocked.
Lock/unlock of the target clip has failed.
Set Clip Flag function has failed.
Normal playback is not possible.
Playback is not possible because a buffer underflow
has occurred in the playback buffer memory.
A media error has been detected.
Replace the media.
This clip cannot be played back because its format is
not supported by this unit.
No memory card is inserted.
Playback is not possible because the memory card is
being used.
An EDL cannot be played back.
Select a clip.
The memory card cannot be played as it is currently
being used on the network.