Rear Panel - Sony XDS-1000 Operation Manual

Rear Panel

1 PCIe expansion slot
1 HD/SD-SDI signal input/output
section (see page 27)
6 SYSTEM TC INPUT connector
4 Digital audio signal input/output section (see page 29)
a PCIe expansion slot
For future expansion, this is provided to enable the
connection of units having a PCI Express interface.
b DVB-ASI OUTPUT (DVB-ASI output) connector
(BNC type)
This connector can output DVB-ASI TS signals when the
optional PDBK-202 MPEG TS Board is installed. For this,
it is necessary to set the maintenance menu item M22:
OPTION SETTING >DVB-ASI to "on" (see page 113).
See "About DVB-ASI Input/Output (When the Optional
PDBK-202 Is Used)" (page 132) for more information
about DVB-ASI TS signals.
26
Rear Panel
2 DVB-ASI OUTPUT connector
3 HDMI OUTPUT connector
5 Analog audio signal input/output section (see page 30)
q; MONITOR connector
9 GPIO connector
8 VIDEO CONTROL connector
7 REMOTE (9P) R/P2, P1 connectors
4 REF. VIDEO INPUT connectors
2 Timecode input/output section (see page 29)
5 Redundant power supply unit installation section
3 Power supply section
qd COMPOSITE OUTPUT 1, MONI/2 connectors
qs (network) connector
qa MAINTENANCE connectors
c HDMI OUTPUT connector
Outputs digital signals (video, audio, control signals).
Output signals are E-E signals or playback signals,
according to the setting of the REC/PB2 PORT and PB1
PORT buttons on the front panel.
Allows you to connect a device with an HDMI input
connector, such as an HD projector or a high-definition
TV.
Audio output signals are the signals of the channels
selected with MONITR L and MONITR R on the HOME
page of the function menu.
(see page 29)