Front Panel Block - Sony XAV-701BT Service Manual

XAV-701BT/741
Note: Follow the disassembly procedure in the numerical order given.
3-2.

FRONT PANEL BLOCK

front panel block
1 Turn the power on and press
the eject button to open the
front panel block.
Note 1: When drawing out the front panel,
fundamentally turn on the power and
press the Eject button to open.
Draw it out manually only if it does not
move though the Eject button is pressed.
(You will feel heavy because the clutch is engaged
with the drive block. Be careful about this operation
as the drive block or other parts could be deformed.)
qa flexible printed wiring board (60 pin)
(CN7301)
7 hook
6 screw
8 roller
(Z M2
qs front panel block
14
3)
8 roller
0 LID (DISPLAY) board
9 two screws
(PTW S2
7 hook
6 screw
(Z M2 3)
Note 2: When you install the flexible flat cable, please install them
correctly. There is a possibility that this machine damages
when not correctly installing it.
OK
5)
Insert is straight
to the interior.
flexible flat cable
flexible flat cable
connector
2
3 hook spring
4
5 tension spring (rattle)
NG NG
Insert is shallow Insert is incline
flexible flat cable
connector connector