What Does Each Message Mean - Konica Minolta bizhub 160f User Manual

8
8.9

What does each message mean?

Message
*REMOVE PAPER IN BYPASS
TRAY*
FRONT COVER OPEN
CLOSE FRONT COVER
DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
MEMORY FULL
PRESS ANY KEY
MACHINE TROUBLE
SERVICE CALL (C####)
FUSER COVER OPEN
CLOSE FUSER COVER
PAPER JAM
OPEN FRONT COVER
NO SUITABLE PAPER
LOAD PAPER (LT)
INCORRECT T/C TYPE
CHANGE T/C
8-28
Cause
Paper is loaded in the by-
pass tray.
The front cover of the main
unit is open or not securely
closed.
The automatic document
feeder is lifted up (while a
document is loaded into it).
The document feeder cover
is open.
The size of the data for the
scanned document has ex-
ceeded the capacity of the
memory.
Some problem occurred in
the machine.
The fuser cover of the main
unit is open or not securely
closed.
A paper misfeed occurred.
All misfed paper was not re-
moved from the main unit.
The fuser cover of the main
unit is open or not securely
closed.
In fax mode, plain paper of a
size other than letter, legal or
A4 is loaded into the paper
tray.
Incorrect type of toner car-
tridge is installed.
Toner cartridge is not in-
stalled.
When a message appears
Action
Remove the paper from the
bypass tray.
Securely close the front cov-
er.
Securely close the automatic
document feeder or remove
the document from the auto-
matic document feeder.
Securely close the document
feeder cover.
Press the [Panel reset] key,
or turn the machine off, then
on again. (The scanned data
should be cleared from the
memory.)
Turn the machine off, then on
again. If the error is still dis-
played, contact your service
representative.
Securely close the fuser cov-
er.
Perform the misfeed-clearing
procedure. (page 8-18)
Close the fuser cover, then
open and close the front cov-
er.
Load plain paper of the ap-
propriate size into tray 1 or
the optional tray 2.
Install the correct type of
toner cartridge. (p. 8-6)
Install the toner cartridge.
(page 8-7)
bizhub 160f