Reception Methods; Manual Reception; To Receive A Fax Manually; Memory Reception - Konica Minolta bizhub 160f User Manual

Fax transmission/Reception methods
6.2

Reception methods

6.2.1

Manual reception

This machine normally receives faxes automatically. However, if a telephone
is connected and the same line is used for phoning and faxing, the document
can simply be received after talking with the caller over the phone.
Note
Manual reception is possible if a telephone is connected to the TEL port
of this machine.
To receive faxes manually, use the corresponding utility mode function to
select the manual reception mode (p. 7-64).

To receive a fax manually

1
After the telephone rings, pick up the receiver to talk with the caller.
2
After talking and the caller's fax machine sounds long beeps, press the
[Start] key.
The machine starts receiving the fax.
? Were the long beeps not sounded by the caller's fax machine?
% If the caller's fax machine is set to send automatically, the long
beeps may not be sounded.
3
If the telephone receiver is replaced, the fax reception is finished and
the machine sounds a beep.
6.2.2

Memory reception

This machine automatically prints faxes that it has received. However, when
receiving confidential faxes, the received document can be stored in the
memory and printed at a specified time or when memory reception is turned
off.
!
Detail
Memory reception is set using the corresponding utility mode function.
For details on changing the setting, refer to "Specifying MEMORY RX
MODE" on page 7-64.
bizhub 160f
6
6-23