To Change/Delete A Programmed One-Touch Dial Key - Konica Minolta bizhub 160f User Manual

7

To change/delete a programmed one-touch dial key

1
Select the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2
Press the one-touch dial key that you
wish to change or delete.
3
Press the [No/C] key.
– If a one-touch dial key pro-
grammed with a group of fax
numbers or a transmission/re-
ception function is pressed, the
message shown at the right ap-
pears. To delete the programmed
settings, press the [No/C] key.
The FAX REGISTRATION menu
appears again.
– To change the group dialing or program dialing settings, refer to
page 7-36 and page 7-40.
4
Using the [*] and [)] keys, select ei-
ther
press the [Yes] key.
– If
displayed. (Continue with step 6.)
– If
touch dial key are deleted and the
appears again.
– If you try to change the settings for a one-touch dial number used
in group dialing or program dialing, a confirmation message ap-
pears, asking whether or not to change the corresponding settings
programmed in group dialing or program dialing.
If the [Yes] key is pressed, the corresponding settings programmed
in group dialing or program dialing are changed.
If the [No/C] key is pressed, the corresponding settings pro-
grammed in group dialing or program dialing are deleted.
– If a one-touch dial number used in group dialing or program dialing
is deleted, it is also deleted from the corresponding group dialing or
program dialing.
7-30
ONE-TOUCH DIAL
EDIT or DELETE, and then
EDIT was selected, the name is
DELETE was selected, the settings programmed for the one-
Using the utility mode
in the
SELECT REGIST.KEY screen
bizhub 160f