Konica Minolta bizhub 160f User Manual page 151

Fax transmission/Reception methods
5
Specify the relay station, and then
press the [Yes] key. For details, refer
to "Dialing" on page 5-3.
A screen appears, allowing you to
specify the relay box ID.
6
Using the 10-key pad, enter the relay
box ID.
– Enter the mailbox ID (SUB) (20
digits or less) registered for the
recipient.
? Do you want to correct the ID?
% Press the [No/C] key, and then enter the new number.
7
Press the [Yes] key.
A screen appears, allowing you to specify the password.
8
Using the 10-key pad, enter the
password.
– Enter the password (20 digits or
less) if a password has been set
at the relay station.
? Do you want to correct the password?
% Press the [No/C] key, and then enter the new number.
9
Press the [Start] key to begin scanning and sending the fax.
bizhub 160f
6
6-17