Using the utility mode
7.7
TX operation settings
From the TX OPERATION menu, various functions for sending faxes can be
set.
No.
TX OPERATION
1
SCAN CONTRAST
2
RESOLUTION
3
DEFAULT TX
4
HEADER
bizhub 160f
Characteristic/Description
This function can be used to set the default scanning contrast
level to one of five settings between "LIGHT" and "DARK".
For dark-colored paper (media), select a setting towards
"LIGHT". For faint or colored text, select a setting toward
"DARK".
This function can be used to set the default scanning resolution
(image quality) to one of the following: "Standard", "Fine", "Super
Fine", "Half Tone + Standard", "Half Tone + Fine" or "Half Tone +
Super Fine".
• Default setting: Standard.
This function can be used to set the default transmission mode
to "MEM.TX" or "ADF TX".
MEM.TX: memory transmission
ADF TX: direct transmission
• Default setting: MEM.TX.
This function can be used to set the default setting ("ON" or
"OFF") for adding the header (date sent, sender's name and fax
number, etc.) when sending faxes.
• Default setting: ON.
7
7-57