What Does Each Message Mean - Konica Minolta bizhub 161f User Manual

8
8.9

What Does Each Message Mean?

Message
*REMOVE PAPER IN BYPASS
TRAY*
FRONT COVER OPEN
CLOSE FRONT COVER
DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
MEMORY FULL
PRESS ANY KEY
MACHINE TROUBLE
SERVICE CALL (C####)
FUSER COVER OPEN
CLOSE FUSER COVER
PAPER JAM
OPEN FRONT COVER
NO SUITABLE PAPER
LOAD PAPER (LT)
INCORRECT T/C TYPE
CHANGE T/C
8-26
8.9 What Does Each Message Mean?
Cause
Paper is loaded in the Bypass
Tray.
The Front Cover of the main
unit is open or not securely
closed.
The Automatic Document
Feeder is lifted up (while a
document is loaded into it).
The Document Feeder Cover is
open.
The size of the data for the
scanned document has
exceeded the capacity of the
memory.
Some problem occurred in the
machine.
The Fuser Cover of the main
unit is open or not securely
closed.
A paper misfeed occurred.
All misfed paper was not
removed from the main unit.
The Fuser Cover of the main
unit is open or not securely
closed.
In Fax mode, plain paper of a
size other than Letter, Legal or
A4 is loaded into the paper tray.
Incorrect type of toner cartridge
is installed.
Toner cartridge is not installed.
Action
Remove the paper from the
Bypass Tray.
Securely close the Front Cover.
Securely close the Automatic
Document Feeder or remove
the document from the
Automatic Document Feeder.
Securely close the Document
Feeder Cover.
Press the [Panel Reset] key, or
turn the machine off, then on
again. (The scanned data
should be cleared from the
memory.)
Turn the machine off, then on
again. If the error is still
displayed, contact your service
representative.
Securely close the Fuser
Cover.
Perform the misfeed-cleaning
procedure. (p. 8-16)
Close the Fuser Cover, then
open and close the Front
Cover.
Load plain paper of the
appropriate size into Tray1 or
the optional Tray2.
Install the correct type of toner
cartridge. (p. 8-5)
Install the toner cartridge.
(p. 8-6)
bizhub 161f