To Fax Using Program Dialing - Konica Minolta bizhub 160f User Manual

Faxing

To fax using program dialing

If one-touch dial keys have already been programmed with fax numbers and
a transmission/reception function (such as timer transmission or polling re-
ception), that function can be carried out by pressing just the corresponding
one-touch dial key.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the automatic document feeder. (This step is
not necessary with polling reception.)
3
If necessary, change the resolution setting (p. 5-14). (This step is not
necessary with polling reception.)
4
Press the one-touch dial key ([12]
through [15]) programmed with the
desired function.
5
Press the [Start] key.
The programmed function automati-
cally begins.
? Do you want to cancel the timer
transmission?
% To cancel a timer transmission,
select
the "FUNCTION" menu (p. 6-21).
!
Detail
For details on setting program dialing, refer to "Specifying PROGRAM DI-
AL" on page 7-40.
bizhub 160f
CANCEL RESERV. from
5
5-9