Paper Selection; Selecting The Paper Tray Manually - Konica Minolta bizhub 160f User Manual

Konica minolta printer user manual
Hide thumbs Also See for bizhub 160f:
Table of Contents

Advertisement

Making copies
4.2

Paper selection

The tray containing the paper you want to use can be manually selected. if
an optional paper feed unit is installed
When the desired paper is loaded into the bypass tray and the paper size and
type are specified, paper loaded into the bypass tray is given priority during
feeding.

Selecting the paper tray manually

Before selecting the paper tray manually:
0 If paper is loaded into the bypass tray, first remove it.
0 If tray 1 is selected, the paper size and paper type must first be specified.
For details, refer to "Selecting the PAPER SOURCE SETUP menu" on
page 7-13.
1
Position the original.
For details, refer to "Loading originals" on page 3-33.
2
Press the [Paper] key until the tray
loaded with the desired paper is se-
lected.
3
Specify the desired copy settings.
For details, refer to "Making a basic
copy" on page 4-3.
4
Using the 10-key pad, enter the
number of copies to be made, and
then press the [Start] key.
This will start the copy cycle.
bizhub 160f
4
2
LT
4-5

Advertisement

Table of Contents
loading

Table of Contents