Konica Minolta bizhub 160f User Manual page 276

8
Symptom
The edge of the copy is dirty.
* If the problem is not corrected even after the operations described above are performed, con-
tact your service representative.
8-32
Possible cause
The original pad is dirty.
You have selected paper of a
size larger than the original
(when the zoom ratio is full
size).
The original is not placed in
the correct position (when the
zoom ratio is full size).
The reduction ratio selected
does not match the paper size
(when the copy is made at a
manually adjusted reduction
ratio).
When a message appears
Action
Wipe the original pad clean
with a soft cloth dampened
with neutral detergent.
Select paper that is the same
size as the document. Other-
wise, enlarge the copy to the
selected paper size.
Select the same paper size as
the original. Or, reload the pa-
per in the same direction as
the original.
Select a zoom ratio that ad-
justs the copy size to the size
of the selected paper. Other-
wise, make a reduced copy
with a zoom ratio that match-
es the paper size.
bizhub 160f