What Does Each Message Mean - Konica Minolta BIZHUB 160 User Manual

6
6.9

What does each message mean?

Message
*REMOVE PAPER IN BYPASS
TRAY*
FRONT COVER OPEN
CLOSE FRONT COVER
DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
MEMORY FULL
PRESS ANY KEY
MACHINE TROUBLE
SERVICE CALL (C####)
FUSER COVER OPEN
CLOSE FUSER COVER
PAPER JAM
OPEN FRONT COVER
INCORRECT T/C TYPE
CHANGE T/C
TEXT 1.00
ä[A]ü #XXX: EMPTY
6-28
Cause
Paper is loaded in the by-
pass tray.
The front cover of the main
unit is open or not securely
closed.
The automatic document
feeder is lifted up (while a
document is loaded into it).
The document feeder cover
is open.
The size of the data for the
scanned document has ex-
ceeded the capacity of the
memory.
Some problem occurred in
the machine.
The fuser cover of the main
unit is open or not securely
closed.
A paper misfeed occurred.
All misfed paper was not re-
moved from the main unit.
The fuser cover of the main
unit is open or not securely
closed.
Incorrect type of toner car-
tridge is installed.
Toner cartridge is not in-
stalled.
1 (While specifying copy set-
tings)
The selected paper tray has
run out of paper.
"#" indicates the paper tray,
and "XXX" indicates the pa-
per size.
When a message appears
Action
Remove the paper from the
bypass tray.
Securely close the front cov-
er.
Securely close the automatic
document feeder or remove
the document from the auto-
matic document feeder.
Securely close the document
feeder cover.
Press the [Panel reset] key,
or turn the machine off, then
on again. (The scanned data
should be cleared from the
memory.)
Turn the machine off, then on
again. If the error is still dis-
played, contact your service
representative.
Securely close the fuser cov-
er.
Perform the misfeed-clearing
procedure. (page 6-18)
Close the fuser cover, then
open and close the front cov-
er.
Install the correct type of ton-
er cartridge. (p. 6-6)
Install the toner cartridge.
(page 6-7)
Either load paper of the
specified size into the speci-
fied paper tray, or press the
[Paper] key and select a dif-
ferent paper size.
bizhub 160/161