Konica Minolta bizhub 160f User Manual page 144

6
5
Specify the fax number of the recipient.
Repeat the appropriate operations described below until all recipients
have been specified.
? Do you want to use one-touch dial keys?
% Press the one-touch dial key pro-
grammed with the desired fax
number.
% Press the [Yes] key, and then
specify the next recipient.
?
Do you want to use speed dial
numbers?
% Press the [Speed Dial] key, and
then use the 10-key pad to enter
the 3-digit speed dial number
programmed with the desired fax
number.
% Press the [Yes] key, and then
specify the next recipient.
? Do you want to use group dialing?
% Press the one-touch dial key programmed with the desired group
of fax numbers.
% Press the [Yes] key, and then specify the next recipient.
? Do you want to select from the phone book?
% Press the [Phone Book] key, and then select either
SEARCH
For details, refer to "To fax using the phone book" on page 5-10.
% Press the [Yes] key, and then specify the next recipient.
? Do you want to enter the number using the 10-key pad?
% Enter the fax number of the recip-
ient.
% Press the [,] key. F codes (SUB
and SID) can also be entered.
% Press the [Yes] key, and then specify the next recipient.
? Has the wrong fax number been specified?
% Press the [No/C] key to delete the current selection. This is valid
only before the recipient is set by pressing the [Yes] key.
6-10
to select the desired fax number.
Fax transmission/Reception methods
LIST or
bizhub 160f