Placing The Original On The Original Glass - Konica Minolta bizhub 160f User Manual

Before making copies or faxing

Placing the original on the original glass

The method for positioning the original differs depending on the type of orig-
inal being used.
Care should be taken when positioning the following types of originals.
- An original of a non-standard size:
The document size cannot be detected automatically. Press the [Paper]
key or the [Zoom] key, and then select the desired paper size (p. 4-5) or
zoom ratio (p. 4-10).
- A highly transparent original (OHP transparencies, translucent pa-
per, etc.):
Place a blank sheet of paper of the same size over the original.
- A book or other three-dimensional object:
Let the machine scan the contents of the original with the original cover
or the automatic document feeder raised. Do not attempt to push the
original glass with excessive force, as a malfunction could result. The
maximum load resistance of the original glass is 2 kg.
7 CAUTION
Bright light can blend your eyes.
% While scanning a thick book or other three-dimensional object with the
automatic document feeder open, do not look directly at the bright light
that may shine through the original glass. Although the light that shines
through the original glass is bright, it is not a laser beam and, therefore,
is not as dangerous.
bizhub 160f
3
3-35