Dialing Type; Junk Fax Filter - Fuji Xerox DocuPrint M218 fw User Manual

• Dialing Type

Purpose:
To select the dialing type.
Values:
Tone*
DP (10PPS)
DP (20PPS)
NOTE:
• The available values differ depending on your Region setting.
• Interval Timer
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is eight seconds.
• Number of Redial
Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the
range of 0 to 9. If you enter 0, the printer will not redial. The default is 3.
• Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is one
minute.

• Junk Fax Filter

Purpose:
To reject faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered
in the Address Book.
Values:
Off*
On
NOTE:
• Ensure to register the fax numbers you want to accept faxes from in the Address Book before using Junk
Fax Filter.
Sets the dialing type to
Sets the dialing type to Dial Pulse (10 pulse per second).
Sets the dialing type to Dial Pulse (20 pulse per second).
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers.
Using the Operator Panel Menus and Keypad
Tone .
340