Figure 30. Connecting the NX-586E to a PC and a panel
!
NX-586
"
DATA
POS
COM
NX-10
Connecting the NX-586E to a panel
Connect the cable with alligator clips to a NetworX V3 panel as follows:
•
Red to POS
•
Black to COM
•
Green to DATA
Programming the NX-586E direct connect module
Figure 31. NX-586E menu structure
Files
13.1
13.1.
Options
13.2
13.2.1
The control panel's programming memory can be copied to one of the four programming memories
in the NX-586E direct connect module and vice-versa. You must enrol and default the module before
you begin to program the system. For more information on enrolling and defaulting, see Chapter B7
Enrolling modules.
File 1
13.1.1.
Files 2 - 4
13.1.1.2
Same as above
13.1.1.3
Speed
NetworX Version 3 Installation Manual
#
Panel Type
Panel to File
File to Panel
245