GE NetworX V3 Installation Manual page 167

Location Term
3.3.14.10 Display Contact Central Station
3.3.14.11 KP Shutdown shows Clock
3.3.14.12 KP Shutdown allows Disarm
3.3.14.13 Status LED
3.3.14.14 Status LED Always On
3.3.15 Pry Off Switch
3.3.15.1 Always Tamper
3.3.15.2 Only Arm-away if On the Wall
3.4 Function Keys
3.5 Set KP Language
3.6 Program KP Text
3.6.1 Zones/Messages
3.6.1.1.1 Zone Names
3.6.1.1.2 Partition Names
Definition
the alarms until they have been viewed.
A menu option that, if enabled, sets the keypad to display
the message Contact Central Station after an alarm has
been reported and the system disarmed.
A menu option that causes the keypad to display the date
and time instead of the "Please Enter Your Code" message.
A menu option that, if enabled, allows a blanked keypad to
be disarmed.
A menu option that, if enabled, turns on the backlighting
for the state indicator (GE logo) on the keypad.
A menu option that, if set to Yes, causes the state indicator
to be on at all times. This option is accessible only on a
wired keypad.
A menu entry that groups the wireless keypad options
related to the pry off switch.
A menu option that turns on the wireless keypad's pry off
switch. It actually fixes the wireless keypad to the wall just
like a wired one, while disabling this option renders the
keypad fully portable within the reach of the RF link.
A menu option that allows to arm the system in Away
mode only if the wireless keypad is on the wall.
A menu entry that groups all programmable function key
options.
Function keys are dedicated for a particular function as
programmed by the installer. See Programming the
function keys on page 154.
A menu option that selects the keypad interface languages
available to the user. It is possible to select up to four
languages (Language 1 to 4) out of all available interface
languages. The languages selected here, can be then
toggled by the user (or installer) with the OK key.
A menu entry that groups the language options of the
current keypad. It allows the installer to set options such as
zone name descriptors and user names.
A menu entry that groups descriptors, such as zone names
and custom messages. These names and messages are
language dependent, for example, setting a display
language also changes displayed zone names to the ones
defined for this language.
A menu option that specifies the name of each zone and
allows these names to be edited.
A menu option that specifies the name of each partition.
NetworX Version 3 Installation Manual
167