GE NetworX V3 Installation Manual page 79

Location Term
2.4.1.1.1.6.1.1 Alarms
2.4.1.1.1.6.1.2 Alarm Restores
2.4.1.1.1.6.1.3 Opening/Closing
2.4.1.1.1.6.1.4 Zone Bypass and Restores
2.4.1.1.1.6.2 Tamper/Fault
2.4.1.1.1.6.2.1 Tampers
2.4.1.1.1.6.2.2 Tamper Restores
2.4.1.1.1.6.2.3 Zone Trouble and Restores
2.4.1.1.1.6.2.4 Expander Trouble and Restores
2.4.1.1.1.6.2.5 Siren/Line Cut and Restores
2.4.1.1.1.6.2.6 RF Sensor Lost and Restores
2.4.1.1.1.6.2.7 RF Low Battery and Restores
2.4.1.1.1.6.3 Power
2.4.1.1.1.6.3.1 Power Trouble and Restores
2.4.1.1.1.6.3.2 Aux Short Circuit and Restores
NetworX Version 3 Installation Manual
Definition
the selected phone number.
A menu option that sends a report to the selected phone
number when an alarm occurs.
A menu option that sends a report to the selected phone
number when the alarm has been restored after an alarm.
A menu option that sends a report to the selected phone
number stating when the system is opened (disarmed) and
closed (armed).
A menu option that sends a report to the selected phone
number when a zone is bypassed. A report is also sent
when the zone is restored (un-bypassed).
A menu entry that groups together the tamper and fault
events that are reported to the selected phone number.
A menu option that sends a report to the selected phone
number when a tamper occurs.
A report is sent when the previous tamper is no longer
active.
A menu option that sends a report to the selected phone
number when a zone fault condition occurs. A report is also
sent when the fault condition is no longer active.
A menu option that sends an expander fault and restore
report to the selected phone number.
A menu option that sends a report to the selected phone
number when a siren or phone line fault occurs. A restore
report is sent when the fault is fixed.
A menu option that sends a report to the selected phone
number when an RF sensor is missing. A restore report is
sent to the central station when the receiver receives a
valid signal from the lost transmitter.
A menu option that sends a report to the selected phone
number when a low battery condition occurs in an RF
sensor. A restore report is also sent when the low battery
condition is no longer active.
A menu entry that groups the power events that are
reported to the selected phone number.
A menu option menu option that reports mains failure,
mains restore, low battery and low battery restore events
to the selected phone number.
A menu option that sends a report to the selected phone
number when short circuit is detected. A restore report is
also sent when the short circuit condition is fixed.
79