Removing The Dummy Cover - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

6.3.1.2

Removing the dummy cover

Figure 34: Removing the dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a power supply unit is removed
and not immediately replaced by a new one, a dummy cover must be
reinstalled in the bay to comply with applicable EMC regulations and
satisfy cooling requirements.
TX1330 M1
Upgrade and Maintenance Manual
Power supply
107