Basic hardware procedures
4.5
Reassembling
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top / side cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.5.1
Rack model
4.5.1.1
Installing the rack front cover
Figure 14: Installing the rack front cover
Ê Fit the rack front cover on the server front (1).
Ê Carefully fold up and close the rack front cover (2).
58
31.
Upgrade and Maintenance Manual
"Important
TX1330 M1