Cabling
Figure 218: Connecting the intrusion switch cable
Ê Run the intrusion switch cable through the cable clamps (see arrows).
Ê Connect the intrusion switch cable to the system board connector "Intrusion"
(see circle).
16.3.4 Concluding steps
"Installing the rack front cover" on page 58
Ê
front cover" on page 63
"Reassembling" on page 58
Ê
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
316
(tower server)
Upgrade and Maintenance Manual
(rack server) or
"Installing the
TX1330 M1