Replacing The Tfm; Preliminary Steps; Removing The Defective Tfm - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for Server PRIMERGY TX1330 M1:
Table of Contents

Advertisement

9.4.5

Replacing the TFM

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
9.4.5.1

Preliminary steps

"Locating the defective server" on page 43
Ê
"Disabling BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
Ê Remove all external cables from the expansion card to be removed.
"Getting access to the component" on page 47
Ê
"Removing the fan module" on page 151
Ê
9.4.5.2

Removing the defective TFM

Ê Remove the depending expansion card as described in section
an expansion card" on page
Ê Disconnect the FBU adapter cable as described in section
the FBU adapter cable from the TFM" on page
TX1330 M1
180.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 10 minutes
200.
"Removing
"Disconnecting
187

Advertisement

Table of Contents
loading

Table of Contents