Cleveland OES 6.08 mini Operator's Manual, Use And Care Instructions page 80

How to operate the touchscreen
Regenerating without preheating
If the combi steamer has already reached the required temperature, follow the steps below for regen-
erating:
Step Action
1 You do not need to perform this step if you wish to use the same
regenerating program as you just used. Otherwise:
Enter the regenerating program you require or retrieve it from the
cookbook.
Result:

A regenerating program appears on the 'Regenerate' page.
2 Start the regenerating program
3 Place the food inside the oven as soon as you are prompted to
do so.
4
Close the appliance door.
Result:

Your regenerating program runs, with the remaining regenera-
tion time displayed in the page header.

An audible signal is given as soon as the regenerating program
is finished.
5 Open the appliance door and remove the regenerated product.
Canceling programs before they have finished
You can use
More on this ...
How to do it

Entering the regenerating program .................................................................................................... 76

Retrieving a recipe from the cookbook .............................................................................................. 84
Next steps

Using spare shelves during regenerating .......................................................................................... 79
How to do it correctly

Opening the appliance door safely .................................................................................................. 139

Inserting and removing racks ........................................................................................................... 140

Fitting the air guide panel to rack (mini 6.10 and mini 10.10) .......................................................... 141

Loading / removing food ................................................................................................................... 141

Stowing away the core temperature sensor ..................................................................................... 143

Removing and fitting the suction panel ............................................................................................ 144

Fitting and removing the USB cover ................................................................................................ 145
minis easyTOUCH user manual
at any time to cancel the preheat or regenerating program.
78
Button
or