Regenerate - Cleveland OES 6.08 mini Operator's Manual, Use And Care Instructions

How to operate the touchscreen
►

Regenerate

Hot steam / vapor
Risk of scalding from hot steam and vapor
Escaping hot steam and vapor can cause scalding to face, hands, feet and legs.
Open the appliance door as specified in the safety regulations. Never put your head into the oven!
Requirements
Check that the following requirements have been met:
 The combi steamer is cleaned properly.
 The suction panel is properly locked in place.
 The racks are secured.
 The air guide panels are in place (on mini 6.10 and mini 10.10)
 The USB cover is inserted.
 You are already conversant with the operating steps listed under "How to do it correctly".
Regenerating with preheating
If the combi steamer is still cold, follow the steps below for regenerating:
Step Action
1 Enter the regenerating program you require or retrieve it from the
cookbook.
Result:

A regenerating program appears on the 'Regenerate' page.
2 Start the regenerating program.
Result:

Your combi steamer will preheat.
3
Place the food inside the oven as soon as the appliance is
preheated (you will be prompted to do so).
4
Close the appliance door.
Result:

Your regenerating program runs, with the remaining regenera-
tion time displayed in the page header.

An audible signal is given as soon as the regenerating program
is finished.
5 Open the appliance door and remove the regenerated product.
minis easyTOUCH user manual 77
Button
or