Cleveland OES 6.08 mini Operator's Manual, Use And Care Instructions page 100

Working with the mini 2in1
What happens when you switch over the touchscreen
The touchscreen behaves as follows when switched over:
 After being switched to another oven compartment, the touchscreen always displays the page that
was last displayed for this oven compartment.
Example: You were on the 'Cook' page for oven compartment 1 and started a cooking program from
there. Then you switched over to oven compartment 2 and opened there the 'Regenerate' page.
When you switch back to oven compartment 1 you are taken directly to the 'Cook' page again.
 If you switch from oven compartment 1 to oven compartment 2 while a cooking program is running
in oven compartment 1, the status data for this cooking program is displayed in the 'oven compart-
ment 1' button (see Layout of the 2in1 work pages on page 99).
 When certain events happen, the touchscreen switches automatically to the other oven compart-
ment. You can preset the events for which this shall occur (see The General page for 2in1 on page
102, 'Navigation' tab).
 It is not possible to switch to the other oven compartment from the 'Settings' page or any of its sub-
pages.
Making settings on the mini 2in1
When making settings on the mini 2in1 there are certain features particular to the mini 2in1:
 The settings that are made always apply to both oven compartments.
 In order to be able to configure all the functions on the 'Settings' page, the touchscreen must have
already displayed the start page of the other oven compartment before it was switched over. Other-
wise not all the functions are available on the 'Settings' page.
 It is not possible to switch to the other oven compartment from the 'Settings' page or any of its sub-
pages.
minis easyTOUCH user manual 98