Removing And Fitting The Suction Panel - Cleveland OES 6.08 mini Operator's Manual, Use And Care Instructions

How to do it correctly
►

Removing and fitting the suction panel

Hot surfaces
Risk of burns from high temperatures inside the oven and on the inside of the appliance door
You may get burnt if you touch any of the interior parts of the oven, the inside of the appliance door or
any parts that were inside the oven during cooking.
Wear personal protective equipment as specified in safety regulations.
Materials required
You need the following materials:
 Suitable tools for undoing the screws e.g. screwdriver
Removing the suction panel
To remove the suction panel, follow the steps below:
Step Action
1
Insert first tool into slot and push in until you feel release.
Insert second tool into slot and rotate until clip is released.
2
Push the suction panel upwards and remove it (2).
Fitting the suction panel
To fit the suction panel, follow the steps in the reverse order.
More on this ...
How to do it correctly

Inserting and removing racks ........................................................................................................... 140

Stowing away the core temperature sensor.....................................................................................143
minis easyTOUCH user manual
Illustration
144