Guide-Ejection Assembly, Fuser Connector Assembly And Color-Registration Assembly - Oki C310dn Maintenance Manual

Oki Data CONFIDENTIAL
4.2.17 Guide-ejection assembly, fuser connector
assembly and color-registration assembly
(1) Remove the left side cover, the right side cover, the rear cover and the top cover
assembly.
(2) Remove the CU/PU PCB and the low-voltage power supply.
(3) Detach the guide-ejection assembly ① .
(4) Remove the two (silver-colored) screws ② to detach the fuser connector assembly
③ .
(5) Remove the film-PUCU board ④ and the film-power board ⑤ .
(6) Remove the (silver-colored) screw ⑧ to remove the image drum fan assembly ⑦ .
(7) Remove the two (silver-colored) screws ⑥ to remove the cover-beam ⑨ and the
plate-beam ⑩ .
(8) Remove the three (silver-colored) screws ⑪ to remove the two torsion springs ⑫
and then the cover-code ⑬ .
(9) Remove the four (silver-colored) screws to detach the color-registration assembly ⑮.
44346001TH Rev.1
4.REPLACEMENT OF PARTS
71 /