Oki Data CONFIDENTIAL
2. Remove the connector cover.
Lock
3. Remove the printer cable.
4. Touch the metal part of the printer to discharge static.
Metal part
44346001TH Rev.1
Connector cover
Printer cable
5. Loosen the screw and remove the bracket.
Bracket
6. Insert an additional memory into the slot and push it against the
main unit.
Note! • Do not touch electronic parts or connector terminals.
• Install the memory by observing the correct orientation of it. The memory
has a notch in its edge so as to fit with the memory slot connector.
7. Attach the bracket and tighten the screw.
Bracket
3. INSTALLATION
Screw
Screw
46 /