Counter Specifications - Oki C310dn Maintenance Manual

Oki Data CONFIDENTIAL

Counter specifications

Total page count
Description Total number of
prints
Count method: Count up after
passing the writing
A4-basis or size
sensor
independence
peration when paper Printed pages are not counted when a paper feed (hopping) jam or a feed jam (380) occurs.
Printed pages are counted when any jam except the said jams occurs.
has jammed
Since the total page count is incremented when the front end of print media passes the writing
sensor, a feed jam (380) is also included into the limits on counts according to its jam type.
Operation for Front/back count
(+2)
Duplex
Reset condition None
Value storage PU
destination
Menu/MenuMap (*2)
output
EngineMenuMap
output
*1. Each of the count is updated at the end of each job or each of four pages; however, the count is not updated if the power is turned off when any page from page one through page three of
a job of four or more pages is being printed.
*2. It is shown in the header of MenuMap.
*3. EngineMenuMap outputs Engine Menu Print (the first page) and Engine EEPROM Dump Print (the last page), and the number of sheets of paper fed from each tray is described only in
the latter one (DUMP page only).
44346001TH Rev.1
MPT page count Tray 1 page count
Number of print media Number of print media
hopped from MPT hopped from Tray 1
Count up if MPF (MPT) Count up if Tray 1
hopping is finished hopping is finished
successfully successfully
Only front count (+1)
None
PU PU
(*3) (*3)
Tray 2 page count Color page count
Number of print media Total number of color prints
hopped from Tray 2
Count up if Tray 2 The number of print media passing
hopping is finished the fuser in color mode is counted
successfully when each job is finished (1*).
The value is counted on an A4/
Letter basis. Refer to A4/Letter
conversion table (on the next page).
If paper jams before passing the fuser, its pages are not counted. If
paper jams after passing the fuser, its pages are counted.
The count increases by two.
If a color page and a monochrome page exist in a pair of two pages,
the color page count increases by one, and the monochrome page
count increases by one. If a pair of two pages is in color, the color page
count increases by two. If a pair of two pages is in monochrome, the
monochrome page count increases by two.
(1) Replacement of ROM with another one of a different version
(2) Change of the shipping destination
(3) Execution of MENU RESET of the system maintenance menu
(4) Replacement of a CU board
PU
(*3)
2. DESCRIPTION OF OPERATION
Monochrome page count
Total number of monochrome prints
The number of print media passing
the fuser in monochrome mode is
counted when each job is finished
(1*).
Printing speed for color mode
may be applied to monochrome
mode. The value is counted on an
A4/Letter basis. Refer to A4/Letter
conversion table (on the next page).
CU CU
− −
30 /