Oki C310dn Maintenance Manual page 128

Oki Data CONFIDENTIAL
On- Atten-
Panel display ( identifies
line tion
that no display is provided)
lamp lamp
FLASH FORMAT Off Off
PROGRAM UPDATA Off Off
MODE
WAIT A MOMENT DATA Off Blink Indicates update NIC program data is being received.
RECEIVE
WAIT A MOMENT DATA Off Off
RECEIVED OK
CHECK DATA Off On
REC DATA ERROR
<n>
WAIT A MOMENT DATA Off Blink Indicates update NIC program data is being written.
WRITING
POWER OFF/ON DATA Off Off
WRITTEN OK
44346001TH Rev.1
Detail
Indicates unformatted resident/option flash memory
is being formatted. This message appears after
such memory is detected and MAINTENANCE
MENU-FLASH FORMAT is executed in the System
Maintenance menu. This processing is transparent to
users, and this status occurs in no user environments.
Indicates the printer is in a mode dedicated to update
the NIC program (the controller firmware). By turning
on the printer while holding down the ONLINE button,
the printer is put into the mode.
Indicates reception of update NIC program data is
complete.
Indicates that the printer has an error during
reception processing of update NIC program data.
<n>
1: A size error.
2: A checksum error.
3: A printer model number error.
4: A module interface version error.
5: A FAT version error.
Indicates writing of update NIC program data is
complete.
On- Atten-
Panel display ( identifies
line tion
that no display is provided)
lamp lamp
CHECK DATA Off On
DATA WRITE ERROR
<n>
LOADER VERSION Off Off
XX.XX
COMMUNICATION Off Off
ERROR
STATUS MODE Off Off
7. TROUBLESHOOTING
Detail
Indicates that the printer has an error during writing
of update NIC program data.
<n>
1: A memory allocation error.
2: A download file error.
3: An error in obtaining available device memory.
4: An error of insufficient available device memory
5: A file writing error.
6: A CU firmware mismatch error.
Indicates that the PU firmware is running in
the Loader mode. The CU firmware sends this
message at power-on of the printer. This message
may occur in user environments, requiring
maintenance by maintenance personnel (like
service calls)
Indicates communication with the PU firmware
failed. This message may occur in user
environments, requiring maintenance by
maintenance personnel (like service calls).
Indicates that the printer started in the permanent
online mode. Even when having an error after
starting in the mode and going online (into a Ready
state), the printer processes data (jobs) sent from
the outside (a host), indicating an error or warning
on the panel. Turning on the printer while using an
OK, Back and Down button combination puts the
printer into the mode. The button combination is
transparent to users, and this state occurs in no
user environments.
1 /