Oki C310dn Maintenance Manual page 108

Oki Data CONFIDENTIAL
5.3.2.9 Print counter display
The print counter display is used for viewing print counter values.
1. Enter the self-diagnostic mode and, until PRINTER STATUS appears, press
or ( displays the next test option and
Then press the OK button.
2. Press or , and each count is printed (the ONLINE or CANCEL button is
disabled).
3. Press to end the option (the state for step 1 is restored).
Upper display Lower display
K- ********IMAGES
IMPRESSIONS
Y- ********IMAGES
IMPRESSIONS
M- ********IMAGES
IMPRESSIONS
C- ********IMAGES
IMPRESSIONS
TOTAL SHEET ********COUNTS
CNT
44346001TH Rev.1
displays the preceding test option).
Format Unit Detail
Decimal Images Each display the number of a
color's pages printed.
Decimal Images
Decimal Images
Decimal Images
Decimal Prints Displays the total number of pages
printed.
5.3.2.10 Factory/Shipping mode setting
The Factory/Shipping mode setting is used for switching from the Factory to Shipping mode.
1. Enter the self-diagnostic mode and, until the following message appears, press
or .
FACTORY MODE SET
2. Press or , and the following message appears. Press
to set (refer to the table shown below) appears.
FACTORY MODE
SHIPPING MODE
3. By pressing the OK button with the option on the display, a setting for the option
can be selected.
4. Hold down the OK button (for three seconds) with the display showing the
setting to set. The setting is stored in the EEPROM. The state for step 2 is
restored.
5. Repeat steps 2 through 4 when necessary.
6. Press to end the option (the state for step 1 is restored).
Display Settings
FACTORY FACTORY MODE
MODE
SHIPPING MODE
FUSE INTACT BELT UNIT ******
FUSE UNIT ******
Note: Six
asterisks
ID UNIT ******
(******)
identifies
INTACT or
BLOWN.
5. MAINTENANCE MENUS
or until an option
*
Function
Establishes the Factory mode (a fuse-cut disabling
mode).
Deselects the Factory mode to enable the fuse-cut
function.
Displays the fuse status of the transfer belt unit.
Displays the fuse status of the fuser.
Displays the fuse status of an image drum unit.
108 /