Oki C310dn Maintenance Manual page 117

Oki Data CONFIDENTIAL
Category Option Settings
FILE SD-M EXECUTE
SYS INITIALIZE
MAIN-
TE1
PARTITION EXECUTE
SIZE
PCL nnn%/
COMMON mmm%
PSE lll%
SD-M PCL
FORMAT- COMMON
TING PSE
FLASH EXECUTE
INITIALIZE
FILE CHK FILE EXECUTE
SYS SYS
MAIN-
TE2
CHK ALL EXECUTE
SECTORS
44346001TH Rev.1
Description C530 C330
Puts an SD memory card back to
the factory-shipped configuration.
The printer displays this message
with the SD memory card installed.
Displays a list of SD memory card
partition sizes. The printer displays
this message with an SD memory
card installed.
Each Set a percentage of partition
size. These three sizes should be
set to 100% in total.
Formats a specified partition. The
printer displays this option with an
SD memory card installed.
Initializes flash memory.
Repairs the file system. This
processing needs several tens of
seconds. The printer displays this
option with an SD memory card
installed.
Repairs the file system and an
SD memory card. This processing
needs approximately 30 minutes
when the size of the SD memory
card is 16 GB. The printer displays
this option with the SD memory
card installed.
C510/
Category Option
C310
- - FILE SD CARD ENABLE
SYS DISABLE
MAIN-
TE2
- -
SD CARD EXECUTE
- -
ERASE
- -
- -
INITIAL YES
LOCK NO
- -
LAN- LANG EXECUTE
GUAGE INITIALIZE
MENU
PS L1 TRAY TYPE1
MENU TYPE2
CHANGE NEW ************
PASSWORD
PASS-
WORD
VERIFY ************
PASSWORD
Settings Description
Sets whether or not to use an SD
memory card.
ENABLE: Uses an SD memory
card.
DISABLE: Uses an SD memory
card.
The printer displays this option with
the SD memory card installed.
Completely erases the information
in an SD memory card. This option
should be operated, for example,
before disposal of the SD memory
card. This processing needs
approximately 30 seconds when
the size of the SD memory card
is 16 GB. The printer displays the
option with the SD memory card
installed.
Sets whether to enable or disable
SD memory card and flash memory
initialization.
YES: Disables changes that involve
initialization. This setting does not
display FILE SYS MAINTE1.
NO: Enables initialization.
Initializes the message file in flash
memory.
Sets the type of the tray selection
number.
Sets a new password for entry
to ADMIN MENU. The password
should be set to six to 12 numbers
or lower-case characters.
Enters for verification the password
set for NEW PASSWORD.
5. MAINTENANCE MENUS
C510/
C530 C330
C310
- -
- -
-
117 /